Cannon LBP 2900B Driver on Mac OS 12 Monterey
Cannon LBP 2900B Driver installation on M1 Mac
2023: Tutorial on Installing on MacOS 14 Sonoma - Click Here
2023: Updated Tutorial on Installing on MacOS 12 Monterey - Click Here
Note: I've given the rights to this post to an individual who hade made a new blog just for the printer and its related things.
It is working. Thank you so much
ReplyDeleteWelcome
DeleteThank you for the video. It was not found in youtube for some reason.
ReplyDeleteIt is working perfectly. Thanks a tonne
ReplyDeleteWelcome
DeleteДобрый день! Следовала инструкции, при подключении принтера выдает ошибку aptmoncnab3 поврежден. Что делаю не так?
ReplyDeleteЕсди быть точнее, то ошибка выскакивает уже на этапе 7 - вставки команды в терминал. не нравится команда
Deleteобратитесь к приведенному выше видео, это новое видео и содержит подробные инструкции
DeleteУ меня на 12.5.1 М1 миник всё сработало с первого раза. Если ошибку выдаёт всё равно то проверьте установлена ли у вас Xcode, когда я это же продлевал прошлый раз в БигШур то ошибка была примерно там же, оказалось не хватало утилиты входящей в состав Xcode
Deleteне могу скачать патч на принтер lpb2900, по ссылке одна реклама. что делать?
ReplyDeleteНажмите на красную кнопку с надписью «Докажите, что вы человек», введите капчу и нажмите «Получить ссылку».
DeleteThanks a lot, its working perfectly
ReplyDeleteWelcome
DeleteKindly check "Note(s)" for links.
ReplyDeleteOlder answer for Mojave didn't work, but your answer for Monterey did! I followed the steps exactly and it took a brief pause but printed the first time. Thank you
ReplyDeleteThank you so much...its working...you made this set up so easier to understand.
ReplyDeleteWelcome.
DeleteWorked well for me. Had to update the Monterey and restart for it to work. Thanks much. Appreciate!
ReplyDeleteWelcome
DeleteWhat to do if the download link won't open?
ReplyDeletehttps://mega.nz/file/h1pgASrC#NdM4d-8Ac0echsoQ7jvdXS9Bcw_-OokR2WsA72GpkHM
Deletecan not get the link , any other way to get patch?
DeleteUse vpn
DeleteI used the link from Note(s) but it won't open
ReplyDeleteWhat to do??
Link is posted again to your other reply in comment.
DeleteУ меня данная инструкция не работает. Все выполнил в точности, но при попытке тестовой печати просто появляется надпись: "Печать - отправка данных на принтер."
ReplyDeleteИ все, дальше ничего не происходит.
Попробуйте выполнить шаги, описанные в видео.
Delete1. Обновите MacOS
2. Перезагрузите Mac и повторите шаги.
3. Убедитесь, что у вас такая же версия принтера, как указано
It works! Thank you very much!
ReplyDeleteСпасибо!!!
Welcome
DeleteExcellent guidance,it works best.I was facing this problem since a month,thanks a lot,you took away my problem.
ReplyDeleteThank you
DeleteWorks well
ReplyDeleteThank you
DeleteHey, it works perfectly - you are my hero!!!! :-) Thank you :-))))
ReplyDeleteThank you
Deletethanks a ton!! it works
ReplyDeleteThank you
DeleteFor download from mega.nz I had to use VPN, I don't know why, but it's okay..
ReplyDeleteBig Thanks 🫶👍
ALSO ---->>>>
"I don't have any earning source for this work so I tried to monetize it"
Its okay to monetize your work, if you are helping to save hours & hours, surely people can click few ads.
Thank you... I also provided direct links if someone don't want to go through ads.
Deletegive me the link please I have macOS Monterey 12.1 and I can't use my canon lbp2900 please help me and I have patch damaged
DeleteKindly follow the video and see "Notes" below download in webspage
DeleteI entered the command in terminal but still got the "captmoncnab3" is damaged" pop op message. What could I have done wrong? and how to possibly correct it? Thanks in advance...!
ReplyDeleteKindly see video... It has the solution... You probably did not run the patched file in command before adding the printer
DeleteI can open the patch , can someone help?
ReplyDeleteI can't open the patch , how to do bros??
DeleteYou don't need to open patch file.... Put it in terminal with code I have written in tutorial and video...
DeleteI got it now , use VPN to get the Patch of MEGA. Work well. Appreciate
ReplyDeleteThank you...
Deleteit works flawlessly. thank you so much
ReplyDeleteWelcome
DeleteSensational - thank you very much - it works! :-)
ReplyDeleteWelcome
DeleteСпасибо!!! 12.5.1 М1 миник всё сработало с первого раза. Под прошлыми ОС требовалось наличие в системе Xcode. Thanks!!! 12.5.1 M1 Mac mini everything worked the first time. Under previous OS, Xcode was required in the system.
ReplyDeleteThank you.
DeleteMan, you saved my life, or at least, my perfectly working Canon LBP 2900. I can't thank you enough.
ReplyDeleteWelcome
Deleteeven after installing drivers for first time my printers folder shows empty each and everytime what should i do?
ReplyDeleteYou should have administrator privileges to allow the setup to install. Requesting to check video again.
Delete"CAPT Statusmonitor for Macintosh" app says: "The connected printer cannot be used.
ReplyDelete...and that was handled by REBOOT. Maybe the old trick could be mentioned...
DeleteDelete printer files and try again. This only works for Cannon LBP2900 and Cannon LBP 2900B printers. Check if your printer model is same
DeleteDelete old drivers by watching the video and try again.
ReplyDeleteit working ..... uhh!! thanks man )))))
ReplyDeleteWelcome
DeleteThank you very much :)
ReplyDeleteWelcome
DeleteThank you bro its really works
ReplyDeleteThank youuuuuuuuuuuuuuuuuuuuuu
ReplyDeleteWelcome
DeleteWil this work if I update to Ventura?
ReplyDeleteYes it is working, I've updated to Ventura and did all the steps again except now with System Settings, it is little difficult to navigate in new Settings app but I used search bar to find it.
DeleteThank you so much!!!!
ReplyDeleteIt work exactly like the video ^^
К сожалению, перестало работать( Отправлю документ на печать, бегает ползунок "Печать - отправка данных на принтер"...
ReplyDeleteпереустанови драйвера, бывает
DeleteWorked perfectly on M2 Pro, MacOS Sonoma 14.0. Thank you!
ReplyDelete